Safal Engineers & Fabrication, KolhapurSafal Engineers & Fabrication, Kolhapur
Home About Us Products Contact Us

Products

Construction Instruments

Share: FacebookTwitterStumble
We offer a wide range of Construction Instruments that is fabricated using premium quality raw material and advance technology. Our wide array is used by construction companies for various construction processes. Further, our Construction Instruments are used in construction and maintenance operations.  Lightness and compactness, and superior environmental performance with respect to vibration and shock are its special features.
Round Shuttering

Round Shuttering

Our Round Shuttering is available in size of 900 mm dia. X 2400 mm long material used: made from 10 x 50 mm ms flat & 2. 5 mm ms sheet. They are used in bridge pier columns.

Cutting Edge For Bridge Pier

We are offering Cutting Edge For Bridge Pier. This cutting edge is made up of ms angle 75 x 6 welded back to back & bent to obtain the required shape. Vertical flat is 20 mm thick x 300 mm wide bent to shape and welded to angle to form strong cutting edge for bridge foundation wells.

Cutting Edge For Bridge Pier

ARC Truss

ARC Truss

We are offering ARC truss. This truss is made from ms pipes. Diameter varies from 300 mm to 150 mm. Span 31. 5 m & rise in center of truss is of 8 m.

CRIPS And Formwork Support Columns

Column shown here is 600 mm  x 900 mm x 4800 mm long. This column gets folded as ladders & bracings. Completed column weighs about 300 kg.
As this is folding type column no of columns per truck load is more, which saves on transport cost. swl of column is 40 tons.

Other Information
  • Packaging Details: Packed loose,in dismantled condition.

CRIPS And Formwork Support Columns


Formwork Accessories

Formwork Accessories

Concrete form work (Shuttering) shown here is for psc girder. This is made out of 4 mm thick ms sheet, backed by ms flat 12 x 50 & 6 x 50 mm. Photograph depict form work assembled for length of  10 m. Total quantum was 40 m length of 2 side forms sets & 8 nos bottom shuttering. Bottom shuttering is made out of mc 150 supporting bottom plates. This has been supplied to well known construction consortium in karnataka state(india).

Contact Us
Safal Engineers & Fabrication, Kolhapur
Mr. C. S. Joshi (Partner)
Plot No. F- 35, M. I. D. C., Shiroli, Shiye- Bawada Road
Kolhapur - 416122, Maharashtra, India

Contact via E-mail


Home  |  About Us  |  Products  |  Trade Offers (12)   |  Site Map  |  Contact Us

Member IndiaMART.com © Safal Engineers & Fabrication, Kolhapur. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Contact Us

*Describe Your Requirements in Detail
Remaining Characters: 3500
Your Contact Information
Your Contact Information
*Name:
*Email:
Company:
Website:
*Country:

City:
*Mobile:
*Enter the code: